Faculty Database - MATSUO Takuma

Books and Papers

Conference Presentations

Academic Qualifications

Career History

Major Subjects

Web Sites

Award History

Current Specialized Field

Courses and Lectures taught or delivered in the past

（Last updated : 2024-09-25 14:25:55）

MATSUO Takuma
Department Undergraduate School , School of Science and Technology

Position Professor

■ Books and Papers

1.	2023/03	Article	LODEWAVE (Long-Duration Balloon Experiment of Gravity WAVE over Antarctica) Journal of Evolving Space Activities 1 (Collaboration)
2.	2022/10	Article	Initial Arrival Time Identification Utilizing Wavelet Transform and Akaike Information Criterion for Locating Acoustic Emission Source in a Thin Plate Materials Transactions (Collaboration)
3.	2022/08	Article	Evaluation of UV Degradation of High-Strength Woven Fabric Material by Acoustic Emission Method Advanced Experimental Mechanics 7,pp.97-102 (Collaboration)
4.	2022/07	Article	Evaluation of Fracture Strength of Corroded Steel Bolted Joints Using Acoustic Emission Method pp.213-217 (Collaboration)
5.	2022/01	Article	Development of Non-Contact Deformation Measurement System using Small Drone and Digital Image Correlation Method pp.301-307 (Collaboration)
6.	2021/03	Article	Recent Developments on the Super-Pressure Balloon with a Diamond Shaped Net — Ground Inflation Tests of Two 2,000 m3 Balloons — Transaction of the Japan Society for Aeronautical and Space Sciences Aerospace Technology Japan 19(2),pp.170-175 (Collaboration)
7.	2019/12	Article	Evaluation of the Surface Condition of Spur Gears Using the Acoustic Emission Method Materials Transactions 60(1),pp.2542-2551 (Collaboration)
8.	2019/08	Article	Development of Non-Contact Fatigue Crack Propagation Monitoring Method Using Air-Coupled Acoustic Emission System Engineering Transactions 67,pp.185-198 (Collaboration)
9.	2019/01	Article	Evaluation of tensile strength of high-strength polymer rope pp.17-27 (Collaboration)
10.	2018/09	Article	Measurement of Super-Pressure Balloon Deformation with Simplified Digital Image Correlation Applied Sciences 8(10),pp.2009-1-2009-10 (Collaboration)
11.	2018/01	Article	Development of Immersion-type Optical Fiber AE Sensor for Damage Monitoring of Underground Storage Tank pp.31-36 (Collaboration)
12.	2017/08	Article	Acoustic Emission Pattern Recognition Method Utilizing Elastic Wave Simulation Materials Transactions 58(10) (Collaboration)
13.	2015/03	Article	Estimation of Stress Corrosion Cracking Initiation and Propagation in High-Pressure, High-Temperature Water Environment Utilizing Acoustic Emission Materials Transactions 56(3),pp.327-332 (Collaboration)
14.	2014/06	Article	Evaluation of the Thickness and Bond Quality of Three-Layered Media using Zero-Group-Velocity Lamb Waves J.Physics Conference series 520(1) (Collaboration)
15.	2013/02	Article	Development of Acoustic Emission Waveform Simulation Technique utilizing a Sensor Response and Finite-Difference Time-Domain Method J.Solid mechanics and materials engineering 7(2),pp.176-186 (Collaboration)
16.	2012/06	Article	Damage Evaluation of Unsaturated Polyester Resin Using Zero-Group Velocity Lamb Waves in Non-Contact Matter J.Solid mechanics and materials engineering 6(6),pp.678-684 (Collaboration)
17.	2012/03	Article	Detection of Acoustic Emission (AE) from Zinc Emibrittlement Cracking During Welding Using Optical Fiber AE Monitoring System” Journal of Nondestructive Evaluation (Collaboration)
18.	2012/01	Article	Development of AE Monitoring System with Noise Reduction Function by Spectral Subtraction Materials Transactions 53(2),pp.342-348 (Collaboration)
19.	2011/12	Article	Development of Acoustic Emission Clustering Method to Detect Degradation of Lithium Ion Batteries Journal of Solid Mechanics and Materials Engineering 5(12),pp.678-689 (Collaboration)
20.	2011/02	Article	Monitoring of Corrosion under insulations by acoustic emission and humidity measurement Journal of Nondestructructive Evaluation 30(2),pp.59-63 (Collaboration)
21.	2010/12	Article	New characterization method of AE sensors Journal of Acoustic Emission 28,pp.256-277 (Collaboration)
22.	2009/12	Article	MONITORING OF PIPE CLOGGING BY MUSSELS UTILIZING AN OPTICAL FIBER AE SYSTEM Journal of Acoustic Emission 27,pp.224-232 (Collaboration)
23.	2009/03	Article	Quantitative Evaluation of the Blocking Ratio of a Blockage inside a Pipe Utilizing Film-Type PZT Elements Journal of Solid Mechanics and Materials Engineering 3(2),pp.278-286 (Collaboration)
24.	2008/12	Article	Transfer functions of Acoustic Emission Sensors Journal of Acoustic Emission 26,pp.72-90 (Collaboration)
25.	2007/12	Article	Immersion type quadridirectional optical fiber AE sensor for liquid-borne AE Journal of Acoustic Emission 25,pp.124-131 (Collaboration)
26.	2007/03	Article	Long Range Inspection of Wall Reduction of Tank Utilizing Zero-th Order Symmetric Mode Lamb Wave Materials Transactions 48(6),pp.1208-1214 (Collaboration)
27.	2007/03	Article	Michelson-type Optical Fiber Laser Interferometer for Cylinder Wave Monitoring Materials Transactions 48(6),pp.1208-1214 (Collaboration)
28.	2006/12	Article	Optical Fiber System for AE Monitoring from High Temperature Damages of Tube Journal of Acoustic Emission 24,pp.67-75 (Collaboration)
29.	2006/12	Article	Utilization of Cascade Multi-sensing Optical Fiber AE System for Source Location of Lamb Waves Through Cross-Ply CFRP Plate Journal of Acoustic Emission 24,pp.84-96 (Collaboration)
30.	2006	Article	Optical Fiber Acoustic Emission System For Monitoring Molten Salt Attack Science and Technology of Advanced Materials 7,pp.104-110 (Collaboration)
Display 5 items
Display all(30)

■ Conference Presentations

1.	2022/12/13	Development of a Damage Detection Method by Using Guided Wave Inspection for a Type-IV Composite Vessel (The 17th Asia-Pacific Conference on Fracture and Strength and the 13th Conference on Structural Integrity and Failure)
2.	2022/11/07	Evaluation of adhesive bonding condition of adhesives by surface roughness using AE method (International Conference on Materials & Processing 2022)
3.	2022/11/01	Development of Evaluation Method for Corrosion Defects in Steel Pipes Using Acoustic Emission Method (26th International Acoustic Emission Symposium)
4.	2022/10/31	Development of AE source location method for anisotropic materials by Akaike information criterion and wavelet transform (The 26th International Acoustic Emission Symposium)
5.	2022/08/23	Corrosion Monitoring of Coated Steel by Acoustic Emission Method (7th US-JAPAN NDT Symposium)
6.	2021/11/05	Evaluation of UV Degradation of High Strength Woven Fabric Material by Acoustic Emission Method (The 16th International Symposium on Advanced Science and Technology in Experimental Mechanics)
7.	2021/09/08	Characteristics of Guided Wave Propagation in Bending Bellows
8.	2019/12/11	Development of Corrosion Depth Evaluation Method in Steel Pipe by Acoustic Emission Method (TSME iCOME 2019)
9.	2019/12/11	Development of Smart Hydrogen Storage Vessel by Using Optical Fiber Acoustic Emission Sensor (TSME iCOME 2019)
10.	2019/12/11	Development of Waveform Classification Method of Acoustic Emission Signals by Damages in CFRP Plate Utilizing Machine Learning (TSME iCOME 2019)
11.	2019/12/11	Generation Mechanism of Acoustic Emission Signals from Corrosion under Coating Film by AE Source Wave Analysis (TSME iCOME 2019)
12.	2019/06/18	Development of damage detection method in type-III hydrogen pressure vessel by acoustic emission (AEWG-61)
13.	2018/11/01	Detection of packing error in baked products factory utilizing an acoustic emission method (24th International Acoustic Emission Symposium)
14.	2018/11/01	Development of Evaluation Method of Contaminations in Spur Gears Using AE Method (24th International Acoustic Emission Symposium)
15.	2018/11/01	Evaluation of Initiation and Propagation of Stress Corrosion Cracking in Sensitized Type 304 Stainless Steel under High Temperature and High Pressure Water Environment (24th International Acoustic Emission Symposium)
16.	2018/07/10	Development of Non-Contact Acoustic Emission Monitoring System Utilizing an Air-coupled Ultrasonic Sensor (The Sixth Japan-US NDT Symposium)
17.	2018/07/10	Evaluation of Wear Condition in Spur Gears Using Acoustic Emission Method (The Sixth Japan-US NDT Symposium)
18.	2018/07/01	MEASURING THE DEFORMATION OF THE SUPER PRESSURE BALLOON USING THE SIMPLIFIED DIGITAL IMAGE CORRELATION METHOD (ICEM 2018)
19.	2017/12	Characteristics of Acoustic Emission from Corrosion in Anticorrosive-coated Steel (TSME-iCOME 2017)
20.	2017/12	Development of the Evaluation Method for the Surface Condition of Spur Gears Using AE Method (TSME-iCOME 2017)
21.	2017/12	Development of the Novel Non-contact AE Sensor Using Air-coupled Ultrasonic Transducer for Plates and Cylinders (TSME-iCOME 2017)
22.	2017/12	The method for detecting damages of wire cables using guided waves (TSME-iCOME 2017)
23.	2017/06/12	Corrosion Monitoring Under Cated Steel by Acousitic Emission Technique (2017 International Conference on Materials & Processing ICMP2017)
24.	2017/06/12	Development of Deformation Monitoring Method for Super-Pressure Balloon with Diamond-Shaged Net during the Pressurization Process (2017 International Conference on Materials & Processing ICMP2017)
25.	2016/12/15	Guided Waves Response to the Defect in Wire Cables under Tensile Force (TSME-iCome2016)
26.	2016/12/15	valuation of Fracture Process of a Polymer Gel Using a Non-contact Acoustic Emission Method (TSME-iCome2016)
27.	2016/12/01	AE Generation Mechanism of Rotating Component during Bending Fatigue Test by Non-contact AE Monitoring System (IIIAE 2016)
28.	2016/12/01	Development of AE Classification Method Based on AE Waveform Simulation (IIIAE 2016)
29.	2016/12/01	Estimation of the Mechanism of Stress Corrosion Crack Propagation during a Crevice Bent Beam Test in Sensitized SUS304 Steel by Using an Optical Fiber AE Sensor (IIIAE 2016)
30.	2016/08/01	Radiation Pattern of Acoustic Emission Signals by Rust Fracture Propagated in an Underground Storage Tank (2016 M&M International Symposium for Young Researchers)
31.	2015/10	Development of Acoustic Emission (AE) System for Underground Storage Tank Monitoring Utilizing Immersion-type AE Sensor (International Conference on Advanced Technology in Experimental Mechanics 2015)
32.	2015/10	Non-contact Deflection Measurement for Health Monitoring of Overpass by Using Digital Image Correlation Method (International Conference on Advanced Technology in Experimental Mechanics 2015)
33.	2015/10	Source Location of Stress Corrosion Cracks during Crevice Bent Beam Test Utilizing an Optical Fiber Acoustic Emission System (International Conference on Advanced Technology in Experimental Mechanics 2015)
34.	2015/08	Development of Damage Detection Technique in Sheet Type Lithium-Ion Batteries by Using Acoustic Emission (4th Asian Symposium on Materials and Processing)
35.	2015/08	GUIDED WAVE PROPAGATION IN WIRE CABLE UNDER TENSILE STRESS (4th Asian Symposium on Materials and Processing)
36.	2014/11	Monitoring of Stress Corrosion Cracking in High Temperature and High Pressure Environment by Optical Fiber AE System (22nd International Acoustic Emission Symposium)
37.	2012/11	Characteristics of Acoustic Emission from Lithium Ion Batteries with Different type Carbonaceous Materials (21st International Acoustic Emission Symposium)
38.	2012/08	Development Of Acoustic Emission Waveform Simulation Technique Utilizing A Sensor Response And Finite-Difference Time-Domain Method (3rd Asian Symposium on Materials and Processing 2012)
39.	2012/08	Estimation of Contact Pressure of Solid-Solid Interface by Pulse Waves (3rd Asian Symposium on Materials and Processing 2012)
40.	2012/08	Study On Interaction Low Frequency S0- Mode Lamb Waves With Various Defect On Steel Plate (3rd Asian Symposium on Materials and Processing 2012)
41.	2011/06	Development of Acoustic Emission Clustering Method to Detect Degradation of Lithium Ion Batteries (JSME/ASME 2011 International Conference on Materials and Processing)
42.	2010/11	AE monitoring for intergranular-type stress corrosion cracking of sensitized AISI 304 steel induced by polythionic acid (20th International Acoustic Emission Symposium)
43.	2010/11	Damage detection of graphite electrode in lithium ion battery by acoustic emission (20th International Acoustic Emission Symposium)
44.	2010/11	Evaluation of surface pressure of flange connection by second harmonic waves (International Conference On Experimental Mechanics 2010)
45.	2010/11	Measurement of Acoustic Emission (AE) in High-Temperature Environment Using Optical Fiber AE Monitoring System (International Conference On Experimental Mechanics 2010)
46.	2010/06	An Advanced Acoustic Emission Monitoring System utilizing a Hybrid Technique from an Optical Fiber AE System and Real-Time Noise Reduction Function (The Fourth Japan-US symposium on Emerging NDE Capabilities for a Safer World)
47.	2009/11	Development of AE monitoring system with noise reduction function by spectral subtraction (The 13th Asia Pacific Conference on Non-Destructive Testing)
48.	2009/10	Quantitative Evaluation of the Blocking Ratio of a Blockage inside a Pipe Utilizing Film-Type PZT Elements (JSME/ASME 2009 International Conference on Material and Processing)
49.	2008/12	Blockage Monitorng of Pipes by Shellfishes Utilizion an Optical Fiber AE System (The 19th International Acoustic Emission Symposium)
50.	2008/12	Monitoring of Corrosion Under Insulation by Measuring of Acoustic Emission and Huminity (The 19th International Acoustic Emission Symposium)
51.	2008/07	Monitoring of Blockages by Shellfishes in a Pipe Utilizing an Optical Fiber Acoustic Emission System (14th International Congress on Marine Corrosion and Fouling)
52.	2007/11	Leak detection of pipe line by an optical fiber AE sensing system (NDT for Safety 2007)
53.	2007/10	Heat resistant optical fiber system for AE monitoring in a high temperature vacuum chamber (5th International Conference on Acoustic Emission)
54.	2007/10	Immersion type quadridirectional optical fiber AE sensor for liquid-borne AE (5th International Conference on Acoustic Emission)
55.	2007/10	Optical fiber AE sensor for blockage monitoring of water pipes of power generation plant (5th International Conference on Acoustic Emission)
56.	2006/07	A Cascade Multi-sensing Optical Fiber AE system for Damage Monitoring of Aero-Transportation System (Aoyama Gakuin University 21st Center of Excellence Program. 6th International Symposium on Advanced Acoustic Emission and Ultrasonic and/of New Materials)
57.	2006/07	Acoustic Emission for Crevice Corrosion Monitoring of Stainless Steel (18th International Acoustic Emission Symposium)
58.	2006/07	AE Analysis for Bottom Plate Corrosion of Oil Tank (18th International Acoustic Emission Symposium)
59.	2006/07	AEs from Titanium during Thermal Twinning and Hydrogen Charging (18th International Acoustic Emission Symposium)
60.	2006/07	Development of a New Cascade Multi-Sensor Optical Fiber AE System (18th International Acoustic Emission Symposium)
61.	2006/07	Multi-Channel Optical Fiber AE System for Water Born Acoustic Emission from Corrosion (18th International Acoustic Emission Symposium)
62.	2006/07	Optical Fiber System for AE Monitoring from High Temperature Damages of Tube (18th International Acoustic Emission Symposium)
63.	2006/07	Source Location of Floor Plate Corrosion of Model Tank Using Multi-sensing Optical Fiber AE System (18th International Acoustic Emission Symposium)
64.	2006/07	Utilization of Cascade Multi-sensing Optical Fiber AE System for Source Location of Lamb Waves Through Cross-Ply CFRP Plate (18th International Acoustic Emission Symposium)
65.	2006/06	A Cascade Multi-Sensing Optical Fiber AE System For Fracture Source Study (49th Acoustic Emission Working Group)
66.	2006/06	Optical Fiber AE System for Damage Monitoring of CFRP Plate (SEM 2006 Annual conference)
67.	2005/11	Development of AE Monitoring System Under the High Temperature by Using Optical Fiber Sensor (1st International Conference on Advanced Nondestructive Evaluation)
68.	2005/10	Time and Temperature Dependence of the Fish Scale Damage of Glass-Lining (5th International Conference on Mechanics of Time Dependent Materials)
69.	2002/11	Development of AE Monitoring System using Optical Fibers (11th International Acoustic Emission Symposium)
Display 5 items
Display all(69)

■ Academic Qualifications

1.	2005/04～2008/03	〔Doctorial Course〕 Science and Engineering, Science and Engineering, Aoyama Gakuin University, Completed,
2.	2001/04～2003/03	〔Master Course〕 Mechanical Engineering, Science and Engineering, Aoyama Gakuin University, Completed,
3.	1997/04～2001/03	Aoyama Gakuin University, Graduated,

■ Career History

2003/04～2005/03

NTT IT

■ Major Subjects

Mechanics of Materials

■ Web Sites

http://www.isc.meiji.ac.jp/~mech_mat/index.htm

■ Award History

1.	2014/10	JSNDI LU2013 Best Paper Award
2.	2007/11	Acoustic Emission Working Group (U.S.A), Student Award 2007

■ Current Specialized Field

Mechanics of materials and materials (Key Word：Acoustic Emission, Nondestructive Inspection, Health Monitoring, Optical Fiber Sensor, Noise Reduction, Lithium Ion Battery, non-contact measurement)

■ Courses and Lectures taught or delivered in the past

1.	Mechanics of Materials（Meiji University）