Faculty Database - SAWANO HIROSHI

Books and Papers

Conference Presentations

Academic Qualifications

Career History

Major Subjects

Web Sites

Email Addresses

Award History

Current Specialized Field

（Last updated : 2024-04-01 06:07:03）

SAWANO HIROSHI
Department Undergraduate School , School of Science and Technology

Position Professor

■ Books and Papers

1.	2023/09	Article	Shell forming for improving additional cutting properties of additively manufactured parts International Journal of Automation Technology 17(5),pp.469-476 (Collaboration)
2.	2022/09	Article	Simultaneous estimation of fluid layer thickness and flow velocity using multi-wavelength infrared laser speckle Journal of the Japan Society for Experimental Mechanics pp.202-208 (Collaboration)
3.	2021/08	Article	Fundamental study on discharge assisted cutting Advanced Experimental Mechanics 6,pp.59-64 (Collaboration)
4.	2020/09	Article	Basic study on simultaneous estimation of fluid layer thickness and flow velocity using laser speckle pp.165-172 (Collaboration)
5.	2020/01	Article	Relationship between fluid properties and bearing stiffness in water hydrostatic bearing International Journal of Automation Technology 14(1),pp.73-79 (Single)
6.	2019/07	Article	Verification of the direct measurement principle of linear velocity using Sagnac effect Proceedings of SPIE 11205 (Collaboration)
7.	2018/04	Article	Improvement of profile measurement accuracy using optical probe Journal of the Japan Society for Experimental Mechanics pp.3-9 (Single)
8.	2018/04	Article	Principle investigation on direct measurement method of linear speed by applying the principle of optical gyroscope Journal of the Japan Society for Experimental Mechanics pp.24-30 (Collaboration)
9.	2018/03	Article	Principle confirmation of optical probe lateral resolution by collecting laser irradiation Journal of the Japan Society for Abrasive Technology 62(3),pp.141-147 (Collaboration)
10.	2017/11	Article	Basic study on AFM probe using a low rigidity spring Transactions of the JSME pp.1-10 (Collaboration)
11.	2016/01	Article	On-machine surface texture measuring system using laser speckle pattern analysis International Journal of Automation Technology 10(1),pp.69-77 (Collaboration)
12.	2015/11	Article	A low-profile planar motion table system driven by steel belt International Journal of Automation Technology 9(6),pp.739-745 (Collaboration)
13.	2015/08	Article	Nano-positioning system using self-sensing function of giant magnetostrictive actuator Transactions of the JSME pp.1-13 (Collaboration)
14.	2015/07	Article	High performance hydrostatic bearing using a variable inherent restrictor with a thin metal plate Precision Engineering 41,pp.78-85 (Collaboration)
15.	2015/06	Article	Magnetic fluid seal for linear motion system with gravity compensator Procedia CIRP 33,pp.581-586 (Collaboration)
16.	2015/03	Article	Multi-dimensional assessment of nano/micro scale surface texture using laser speckle pattern analysis Journal of Advanced Mechanical Design, Systems, and Manufacturing 9(1),pp.1-13 (Collaboration)
17.	2014/12	Article	A thermally stable aerostatic spindle system equipped with self-cooling function Journal of Advanced Mechanical Design, Systems, and Manufacturing 8(6),pp.1-10 (Collaboration)
18.	2014/10	Article	Magnetically preloaded aerostatic guideway for high speed nanometer positioning Journal of Advanced Mechanical Design, Systems, and Manufacturing 8(4),pp.1-11 (Collaboration)
19.	2014/06	Article	Monitoring of distance between diamond tool edge and workpiece surface in ultraprecision cutting using evanescent light CIRP Annals - Manufacturing Technology 63(1),pp.341-344 (Collaboration)
20.	2014/01	Article	Surface texture assessment of ultra-precision machined parts based on laser speckle pattern analysis Precision Engineering 38(1),pp.1-8 (Collaboration)
21.	2013/11	Article	A framework for systematizing machine tool engineering International Journal of Automation Technology 7(6),pp.760-768 (Collaboration)
22.	2013/06	Article	A newly developed rotary-linear motion platform with a giant magnetostrictive actuator CIRP Annals - Manufacturing Technology 62(1),pp.371-374 (Collaboration)
23.	2012/07	Article	A newly developed STM-based coordinate measuring machine Precision Engineering 36(4),pp.538-545 (Collaboration)
24.	2012/06	Article	A newly developed ripple-free precision toroidal type motor CIRP Annals - Manufacturing Technology 61(1),pp.363-366 (Collaboration)
25.	2011/10	Article	A developed non-contact active vibration isolation unit for precision machining systems Transactions of the Japan Society of Mechanical Engineers Series C pp.3572-3580 (Collaboration)
26.	2011/10	Article	Three-dimensional profile measuring system with AFM probe Transactions of the Japan Society of Mechanical Engineers Series C pp.3597-3607 (Collaboration)
27.	2011/04	Article	A proposed ultraprecision machining process monitoring method using causal network model of air spindle system International Journal of Automation Technology 5(3),pp.362-368 (Collaboration)
28.	2011/04	Article	On-Machine optical surface profile measuring system for nano-machining International Journal of Automation Technology 5(3),pp.369-376 (Collaboration)
29.	2011/03	Article	A newly developed long range positioning table system with a sub-nanometer resolution CIRP Annals - Manufacturing Technology 60(1),pp.403-406 (Collaboration)
30.	2010/10	Article	Three-dimensional nano-motion system for SPM-based CMM Journal of Advanced Mechanical Design, Systems, and Manufacturing 4(6),pp.1192-1200 (Collaboration)
31.	2010/08	Article	A newly developed X-Y planar nano-motion table system with large travel ranges Journal of Advanced Mechanical Design, Systems, and Manufacturing 4(5),pp.976-984 (Collaboration)
32.	2010/03	Article	A newly developed three-dimensional profile scanner with nanometer spatial resolution CIRP Annals - Manufacturing Technology 59(1),pp.525-528 (Collaboration)
33.	2010/01	Article	Study on wear reduction mechanism of artificial joints grafted with hydrophilic polymer membranes Wear 268(1-2),pp.233-240 (Collaboration)
34.	2009/09	Article	2-axes pin-on-plate sliding test method to evaluate the effective life of artificial joints Journal of the Japan Society for Precision Engineering pp.1123-1128 (Collaboration)
35.	2009/07	Article	Study on long life of artificial joints by investigating optimal sliding surface geometry for improvement in wear resistance Precision Engineering 33(4),pp.492-498 (Collaboration)
36.	2005/10	Article	Shape control in ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet Journal of the Japan Society for Abrasive Technology pp.570-575 (Collaboration)
37.	2004/02	Article	Ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet Journal of the Japan Society for Abrasive Technology pp.90-95 (Collaboration)
Display 5 items
Display all(37)

■ Conference Presentations

1.	2022/11/10	Improvement of additional cutting characteristics for AM manufactured parts by shell forming (19th International Machine Tool Engineers' Conference)
2.	2019/07/18	Verification of the direct measurement principle of linear velocity using Sagnac effect (International Conference on Optical and Photonic Engineering)
3.	2018/11/13	Investigation of the influence of fluid properties on bearing characteristics in hydrostatic bearing using water (17th International Conference on Precision Engineering)
4.	2018/11/03	Study on improving efficiency of cutting by discharge assist (18th International Machine Tool Engineers' Conference)
5.	2018/09/07	Research on direct measurement method of linear speed
6.	2018/09/06	Study on fabrication of photonic crystal by self-organization for straight traveling speed measurement
7.	2018/09/05	Basic study on fluid layer thickness estimation using laser speckle
8.	2018/09/05	Development of a shaft motor applicable to composite trajectory of straight line and curved line
9.	2018/09/05	Research on high efficiency of cutting process of hard-to cut material using discharge
10.	2018/09/05	Study on efficiency improvement of micro electric discharge machining for CFRP using ultrapure water
11.	2016/11/19	Study on the optical probe with the high lateral resolution by the collecting laser irradiation (17th International Machine Tool Engineers' Conference)
12.	2016/11/19	Surface texture assessment based on analysis of laser speckle (17th International Machine Tool Engineers' Conference)
13.	2016/09/06	Study on improvement of the horizontal resolution of an optical probe
14.	2015/03/19	Evaluation on surface roughness with variation of reflected light intensity (JSPE Spring Congress 2015)
15.	2015/03/17	High stiffness aerostatic bearing in gas-liquid layered lubrication (JSPE Spring Congress 2015)
16.	2015/03/17	Nano-positioning control using magnetic flux density for giant magnetostrictive actuator (JSPE Spring Congress 2015)
17.	2014/11/16	Giant-magnetostrictive-actuated positioning system with self-sensing function
18.	2014/11/16	Robust and high speed wide-ranging surface profile measurement based on hyper-multi-point method
19.	2014/11/01	Direct measurement of relative distance between tool and workpiece using an evanescent light (16th International Machine Tool Engineers' Conference)
20.	2014/11/01	High performance hydrostatic bearing using a variable inherent restrictor (16th International Machine Tool Engineers' Conference)
21.	2014/07/25	Magnetic fluid seal for linear motion system with gravity compensator (9th CIRP Conference on Intelligent Computation in Manufacturing Engineering)
22.	2014/07/23	Multi-dimensional assessment of precision machined surface texture based on laser speckle pattern analysis (9th CIRP Conference on Intelligent Computation in Manufacturing Engineering)
23.	2013/11/08	Magnetic attraction force-preloaded aerostatic guideway for high speed nano positioning system (7th International Conference on Leading Edge Manufacturing in 21st Century)
24.	2013/11/07	A long-range straightness measurement with motion error compensation (7th International Conference on Leading Edge Manufacturing in 21st Century)
25.	2013/05/29	Sensorless monitoring of machining torque on tilting platform driven by hybrid actuator (13th International Conference of the European Society for Precision Engineering and Nanotechnology)
26.	2013/03/15	High-performance hydrostatic bearing with variable inherent restrictor (JSPE Spring Congress 2013)
27.	2012/11/10	A thermally stable high speed spindle system equipped with self-cooling function (14th International Conference on Precision Engineering)
28.	2012/11/10	Hydrostatic bearing with high bulk modulus fluid (14th International Conference on Precision Engineering)
29.	2012/11/03	An ultra-precision machining system equipped with an on-machine noncontact profile measuring function (15th International Machine Tool Engineers' Conference)
30.	2012/11/03	Surface texture assessment of ultra-precision machined parts using a laser speckle method (15th International Machine Tool Engineers' Conference)
31.	2012/10/27	Auto balancer for a high-speed spindle using low melting temperature alloy
32.	2012/10/27	Direct measurement of the distance between tool and workpiece using evanescent light
33.	2012/09/14	Detection of contact condition between tool and workpiece with optical method (JSPE Autumn Congress 2012)
34.	2012/06/08	A newly developed nano-pattern generator equipped with an on-machine measuring function (Technical Meeting in PTB)
35.	2012/06/07	A newly developed nano-pattern generator equipped with an on-machine measuring function (12th International Conference of the European Society for Precision Engineering and Nanotechnology)
36.	2012/06/06	Surface texture characterization of ultra-precision machined parts based on laser speckle pattern analysis (12th International Conference of the European Society for Precision Engineering and Nanotechnology)
37.	2011/12/01	A newly developed toroidal type torque ripple-free precision motor (15th International Conference on Mechatronics Technology)
38.	2011/11/09	In-process ultrasonic monitoring method for cutting process (6th International Conference on Leading Edge Manufacturing in 21st Century)
39.	2010/11/20	A developed non-contact active vibration isolation unit for precision machinery systems
40.	2010/11/19	Three dimensional profile measuring system with AFM probe
41.	2010/10/26	A proposed ultraprecision machining process monitoring using causal network model of air spindle bearing system (4th CIRP International Conference on High Performance Cutting (HPC))
42.	2010/10/26	On-machine shape measuring system by means of optical stylus for nano-machining (4th CIRP International Conference on High Performance Cutting (HPC))
43.	2010/07/12	Development of steel belt-driven XY positioning table system (2010 International Symposium on Flexible Automation (ISFA))
44.	2010/06/03	A newly developed ultraprecision machining tool "ANGEL" (10th International Conference of the European Society for Precision Engineering and Nanotechnology)
45.	2010/06/02	Sub-nanometer positioning with a high resolution laser interferometer (10th International Conference of the European Society for Precision Engineering and Nanotechnology)
46.	2010/06/02	Three-dimensional nano-positioning system for compact CMM (10th International Conference of the European Society for Precision Engineering and Nanotechnology)
47.	2010/03/10	A non-contact active vibration isolation unit with minimized vibration transmission components
48.	2009/12/02	A newly developed X-Y planar nano-motion table system with large travel ranges (5th International Conference on Leading Edge Manufacturing in 21st Century)
49.	2009/12/02	Torque error compensation in pneumatic rotary actuator system using an electromagnetic force (5th International Conference on Leading Edge Manufacturing in 21st Century)
50.	2009/06/04	High torque and high precision rotary table system driven by hybrid actuator (9th International Conference of the European Society for Precision Engineering and Nanotechnology)
51.	2008/03/17	Investigation on the sliding surface geometry optimal for the improvement of the wear resistance of an artificial joint (JSPE Spring Congress 2008)
52.	2008/03/17	Pin-on-plate test method for evaluation of the life of an artificial joint (JSPE Spring Congress 2008)
53.	2007/09/14	MPC Polymer Grafting for improving the wear resistance of the artificial joint (JSPE Autumn Congress 2007)
54.	2006/10/11	Ultra-precision finishing for an artificial knee joint by means of abrasive waterjet (The 8th Pacific Rim International Conference on Water Jet Technology)
55.	2006/03/15	Ultra-precision finishing for the artificial knee joint by means of abrasive waterjet (JSPE Spring Congress 2006)
56.	2005/10/21	Improvement in roundness of the femoral head of the artificial hip joint by means of abrasive waterjet (International Conference on Leading Edge Manufacturing in 21st Century)
57.	2004/11/29	Nano meter order finishing for a femoral head of an artificial hip joint by means of abrasive waterjet (Proceedings of the Annual Meeting for Water Jet Technology)
58.	2004/10/28	Shape control in ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet (ASPE 19th Annual Meeting)
59.	2004/09/17	Improvement in roundness of the femoral head of an artificial hip joint by means of abrasive waterjet (JSPE Autumn Congress 2004)
60.	2004/09/03	Shape control in ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet (ABTEC 2004)
61.	2004/09	Ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet (17th International Conference on Water Jetting)
62.	2004/03/17	A study on machining for glass materials by means of abrasive waterjet and UV laser (JSPE Spring Congress 2004)
63.	2004/03/17	Analysis of removal amount in ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet (JSPE Spring Congress 2004)
64.	2003/10/04	Development of ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet (JSPE Autumn Congress 2003)
65.	2003/09/10	Ultra-precision finishing for the femoral head of the artificial hip joint by means of abrasive waterjet (ABTEC 2003)
Display 5 items
Display all(65)

■ Academic Qualifications

1.	2005/04～2008/03	〔Doctorial Course〕, Graduate School, Division of Engineering, The University of Tokyo, Completed, Doctor of Engineering
2.	2003/04～2005/03	〔Master Course〕, Graduate School, Division of Engineering, The University of Tokyo, Completed, Master of Engineering
3.	1999/04～2001/03	〔Master Course〕, Graduate School, Division of Science and Engineering, Keio University, Unfinished course,
4.	1995/04～1999/03	Faculty of Science and Engineering, Keio University, Graduated,

■ Career History

1.	2024/04～	Professor
2.	2015/04～2019/03	Meiji University Senior Assistant Professor
3.	2008/04～2015/03	Tokyo Institute of Technology Precision and Intelligence Laboratory Assistant Professor
4.	2005/04～2008/03	The University of Tokyo

■ Web Sites

http://www.isc.meiji.ac.jp/~sawano/

■ Email Addresses

■ Award History

1.	2012/11	International Machine Tool Engineers' Conference,"Excellent Poster Award" (Surface texture assessment of ultra-precision machined parts using a laser speckle method)
2.	2010/10	Proceedings of the 14th International Machine Tool Engineers' Conference, "Excellent Poster Award" (A newly developed advanced nano-pattern generator with large work area)

■ Current Specialized Field

Manufacturing and production engineering