Faculty Database - KAMETANI YUKINORI

■ Books and Papers

1.	2021/06	Article	Numerical evaluation reveals the effect of branching morphology on vessel transport properties during angiogenesis PLOS Computational Biology (Collaboration)
2.	2021/01	Article	Dissimilar heat transfer enhancement in a fully developed laminar channel flow subjected to a traveling wave-like wall blowing and suction International Journal of Heat and Mass Transfer 164 (Collaboration)
3.	2020/11	Article	Heat transfer enhancement and pressure loss in a plate-fin heat exchanger with V-shaped oblique wavy surface International Journal of Heat and Mass Transfer 161 (Collaboration)
4.	2020	Article	A new framework for design and validation of complex heat transfer surfaces based on adjoint optimization and rapid prototyping technologies Journal of Thermal Science and Technology 15(2),pp.1-15 (Collaboration)
5.	2020	Article	Dissimilarity between turbulent heat and momentum transfer induced by a streamwise travelling wave of wall blowing and suction Journal of Fluid Mechanics 886 (Collaboration)
6.	2019	Article	Topology optimization of electrolyte-electrode interfaces of solid oxide fuel cells based on the adjoint method Journal of the Electrochemical Society 166(13),pp.F876-F888 (Collaboration)
7.	2018/12	Article	Numerical and experimental analyses of three-dimensional unsteady flow around a micro-pillar subjected to rotational vibration Micromachines 9(12) (Collaboration)
8.	2017/12	Article	Drag reduction capability of uniform blowing in supersonic wall-bounded turbulent flows Physical Review Fluids 2(12) (Collaboration)
9.	2016/10	Article	Drag reduction in spatially developing turbulent boundary layers by spatially intermittent blowing at constant mass-flux Journal of Turbulence 17(10),pp.913-929 (Collaboration)
10.	2015/10	Article	Effect of uniform blowing/suction in a turbulent boundary layer at moderate Reynolds number International Journal of Heat and Fluid Flow 55,pp.132-142 (Collaboration)
11.	2015	Article	Direct numerical simulation of a turbulent mixing layer with a transversely oscillated inflow JOURNAL OF FLUID SCIENCE AND TECHNOLOGY 10(1) (Collaboration)
12.	2012	Article	Direct numerical simulation of spatially developing turbulent boundary layer for skin friction drag reduction by wall surface-heating or cooling Journal of Turbulence (Collaboration)
13.	2011/08	Article	Direct numerical simulation of spatially developing turbulent boundary layers with uniform blowing or suction Journal of Fluid Mechanics 681,pp.154-172 (Collaboration)
Display 5 items
Display all(13)

■ Conference Presentations

1.	2019/12	Adjoint-based optimization of heat transfer surface in latent heat thermal storage system (The 2nd Pacific Rim Thermal Engineering Conference (PRTEC2019))
2.	2019/09	Adjoint-based shape optimization of heat transfer surfaces in turbulent flows with DNS-RANS hybrid approach (The 9th Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT2019))
3.	2019/03	Adjoint-based shape optimization for complex heat transfer surface in turbulent flows (European Drag Reduction and Flow Control Meeting 2019 (EDRFCM19))
4.	2019/03	Dissimilar response of the streamwise velocity and temperature field under traveling wave-like wall blowing and suction (European Drag Reduction and Flow Control Meeting 2019 (EDRFCM19))
5.	2018/11	A numerical model for three-dimensional analysis of vibration-induced flow (The 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences (mTAS 2018))
6.	2018/09	Experimental assessment of heat transfer and pressure loss characteristics of optimal heat transfer surfaces (12th European Fluid Mechanics Conference (EFMC12))
7.	2018/08	Adjoint-based shape optimization for turbulent convective heat transfer with a hybrid RANS-DNS approach (16th International Heat Transfer Conference (IHTC16))
8.	2018/08	Optimal control of heat and fluid in a channel at low Reynolds numbers (16th International Heat Transfer Conference (IHTC16))
9.	2017/12	Origin of dissimilarity between momentum and heat transport in a turbulent channel flow (The Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT2017))
10.	2017/10	Shape optimization of three-dimensional solid-fluid interface for conjugate heat transfer (The 9th JSME-KSME Thermal and Fluids Engineering Conference (TFEC9))
11.	2017/04	Dissimilar Control of Heat and Momentum Transfer in a Fully Developed Turbulent Channel Flow via a Streamwise Traveling Wave of Wall Blowing and Suction (European Drag Reduction and Flow Control Meeting (EDRFCM2017))
12.	2016/08	Optimal control input for friction drag reduction in turbulent channel flow (24th International Congress of Theoretical and Applied Mathematics (ICTAM2016))
13.	2015/06	Drag reduction in spatially developing turbulent boundary layers by blowing at constant mass-flux (9th Int. Symp. on Turbulence and Shear Flow Phenomena (TSFP9))
14.	2014/12	Friction reduction in spatially evolving turbulent boundary layers: Effects of uniform blowing and suction (IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows)
15.	2014/09	Detached eddy simulation of a high Reynolds number turbulent boundary layer with uniform blowing (10th European Fluid Mechanics Conference (EFMC10))
16.	2014/09	Detached eddy simulation of spatially developing turbulent boundary layer at high Reynolds number with uniform blowing (10th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM10))
17.	2014/09	Drag reduction in turbulent boundary layers: effect of uniform blowing and suction (10th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM10))
18.	2014/09	Mach number dependency of drag reduction effect by a uniform blowing in a supersonic turbulent channel flow (10th European Fluid Mechanics Conference (EFMC10))
19.	2013/08	Direct numerical simulation of turbulent mixing layer with transversely oscillating inflow (8th International Symposium on Turbulence and Shear Flow Phenomena)
20.	2013/06	Direct numerical simulation of supersonic turbulent channel flow with uniform blowing and suction from walls (The 4th Asian Symposium on Computational Heat Transfer and Fluid Flow)
21.	2012/10	Direct numerical simulation of supersonic turbulent channel flow with uniform blowing and suction (International Computational Mechanics Symposium 2012 (ICMS2012))
22.	2012/06	Direct numerical simulation of spatially developing supersonic boundary layer for skin friction drag reduction (9th Int. ERCOFTAC Symp. on Engineering Turbulence Modeling and Measurements (ETMM9))
23.	2011/07	Direct numerical simulation of spatially developing turbulent boundary layer for skin friction drag reduction by wall surface-heating or cooling (7th Int. Symp. on Turbulence and Shear Flow Phenomena (TSFP-7))
24.	2010/09	Numerical simulation of friction drag reduction control in spatially developing boundary layer (8th EUROMECH Fluid Mechanics Conf.)
25.	2009/10	Direct numerical simulation of traveling wave control in spatially developing turbulent boundary layers (The Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT09))
Display 5 items
Display all(25)

■ Academic Qualifications

1.	2010/04～2013/03	〔Doctorial Course〕 School of Science for Open and Environmental Systems, Graduate School of Science and Technology, Keio University, Completed, Ph.D.
2.	2008/04～2010/03	〔Master Course〕 School of Science for Open and Environmental Systems, Graduate School, Division of Science and Engineering, Keio University, Completed, master
3.	2004/04～2008/03	Department of Mechanical Engineering, Faculty of Science and Technology, Keio University, Graduated, Bachelor

■ Major Subjects

Fluid mechanics

■ Academic Associations Membership

1.	2022～	The Japan Society of Fluid Mechanics
2.	2015～	The Heat Transfer Society of Japan
3.	2007～	The Japan Society of Mechanical Engineers

■ Email Addresses

■ Current Specialized Field

Fluid engineering, Thermal engineering

■ Courses and Lectures taught or delivered in the past

1.	Fluid mechanics（Dept. Mechanical Engineering Informatics, Meiji Univ.）
2.	Fluid engineering（Dept. Mechanical Engineering Informatics, Meiji Univ.）
3.	（Dept. Mechanical Engineering Informatics, Meiji Univ.）
4.	（Dept. Mechanical Engineering Informatics, Meiji Univ.）
5.	（Dept. Mechanical Engineering Informatics, Meiji Univ.）
6.	（Dept. Mechanical Engineering Informatics, Meiji Univ.）
7.	（Dept. Mechanical Engineering Informatics, Meiji Univ.）
Display 5 items
Display all(7)