Faculty Database - Notomi Mitsuo

Books and Papers

Conference Presentations

Academic Qualifications

Career History

Internal Committee Positions

Major Subjects

Academic Associations Membership

Research Topics, Consignment Studies & KAKENHI Researches

Web Sites

Award History

Current Specialized Field

Courses and Lectures taught or delivered in the past

（Last updated : 2024-11-02 11:56:44）

Notomi Mitsuo
Department Undergraduate School , School of Science and Technology

Position Professor

■ Books and Papers

1.	2024/07	Article	Excessive adhesion on the machined surface in wire electric discharge machining of SUS304 stainless steel pp.392-398 (Collaboration)
2.	2023/05	Article	Texture of Valve Spring Materials by Quenching and Oil-tempering Transactions of JSSE pp.29-35 (Collaboration)
3.	2023/03	Article	Effect of shatterproof polymer film application on the fracture types and strength of glass subject to bending load Engineering Failure Analysis 148(107220),pp.1-11 (Collaboration)
4.	2022/11	Article	Evaluation of hydrogen permeability of polymer membranes Journal of the Society of Materials Sciense, Japan pp.903-909 (Collaboration)
5.	2022/06	Article	Numerical modeling and modal analysis of base-isolated RC building Bulletin of the JSME pp.1-12 (Collaboration)
6.	2022/05	Article	The Prediction of Fatigue Crack Nucleating Point in Springs by Finite Element Method Transactions of JSSE pp.23-26 (Collaboration)
7.	2022/05	Article	The Stiffness Design of Tapered Coil Springs with Finite Element Method Transactions of JSSE pp.27-33 (Collaboration)
8.	2022/02	Article	Enhanced hydrogen storage properties of ball-milled Mg with C60 and Fe Mechanical Engineering Journal 9(1),pp.1-11 (Collaboration)
9.	2021/11	Article	Puncture Impact Test on Glass Plate Fitted with Shatterproof Window Film Journal of the Society of Materials Science, Japan pp.796-801 (Collaboration)
10.	2021/09	Article	Numerical Simulation on Dynamic Fracture of Glass Plate Fitted with Polymeric Film Advanced Materials Research 1166,pp.57-64 (Collaboration)
11.	2021/06	Article	Evaluation of hydrogen absorption and desorption properties of Mg/Al based laminated thin films Transactions of the JSME pp.1-12 (Collaboration)
12.	2021/03	Article	Internal Strain Measurement Method of Gel by Applying Particle Image Velocimetry and Digital Image Correlation Journal of the Japanese Society for Experimental Mechanics pp.35-40 (Collaboration)
13.	2021/01	Article	Evaluation of Dynamic Fracture Toughness of a Bonded Bi-Material Interface Subject to High-Strain-Rate Shearing using Digital Image Correlation Engineering Fracture Mechanics 241(107391) (Collaboration)
14.	2021/01	Article	Improved desorption temperature of magnesium hydride via multi-layering Mg/Fe thin film International Journal of Hydrogen Energy 46,pp.4181-4187 (Collaboration)
15.	2019/12	Article	Fracture mode of glass plate subject to low-velocity impact: experimental investigation and finite element simulation Mechanical Engineering Journal 6(6),pp.1-14 (Collaboration)
16.	2019/05	Article	Effect on Mechanical Properties of Fe-Mn-Si Shape Memory Alloy by Rolling and Annealing Transactions of Japan Society for Spring Research (64),pp.9-14 (Collaboration)
17.	2019/03	Article	Improved hydrogen desorption properties of magnesium hydride with TiFe_0.8Mn_0.2, graphite and iron addition International Journal of Hydrogen Energy 44,pp.29189-29195 (Collaboration)
18.	2018/06	Article	Improving the Impact Resistance of Glass Plate by Sticking Thin Film Experimental Mechanics 18(2),pp.103-109 (Collaboration)
19.	2018/03	Article	Large Deformation Behavior of Non-circular Wire Helical Spring with the Fe-based Shape Memory Alloy Transactions of JSSE 63,pp.63-69 (Collaboration)
20.	2016/08	Article	Dynamic Finite Element Method for Impact Fracture of a Glass Installed Polymer Film 10th International Conference on Fracture and Strength of Solids (Collaboration)
21.	2016/08	Article	Hydrogen Storage Properties of Mg-based Multilayer Films Mechanical Engineering Journal 3(4),pp.1-8 (Collaboration)
22.	2015/08	Article	A Device of Gas Transmission Rate for Thin Films in a Hydrogen Storage System 4th Asian Symposium on Materials and Processing (Collaboration)
23.	2015/08	Article	Development For Hydrogen Storage Mg-Ti Solid Solution By Mechanical Alloying 4th Asian Symposium on Materials and Processing (Collaboration)
24.	2015/08	Article	Development of Cu-Sn Alloy with Mechanical Alloying 4th Asian Symposium on Materials and Processing (Collaboration)
25.	2015/08	Article	Impact Resistance Of The Glasses Installed Nano-Lamirated Films And Aramid Fiber Cloth 4th Asian Symposium on Materials and Processing (Collaboration)
26.	2015/08	Article	Influence of Annealing on Shape Memory Property in Fe-Mn-Si Based Alloy 4th Asian Symposium on Materials and Processing (Collaboration)
27.	2015/08	Article	The Study of Variant Selection for Shape Memory Effect on Fe-Mn-Si Based Alloy with EBSD 4th Asian Symposium on Materials and Processing (Collaboration)
28.	2015/03	Article	Hydrogen absorption property of Magnesium Formate by spillover at the ambient temperature TMS2015 (Collaboration)
29.	2015/03	Article	Hydrogen absorption-desorption properties of Mg/Fe multi-layer film with PLD Transactions of the JSME pp.1-14 (Collaboration)
30.	2015/03	Article	Hydrogen Absorption-Desorption Properties of Mg/Ti Multi-Layer TMS2015 (Collaboration)
31.	2014/12	Article	Hydrogen absorption amount of magnesium formate at room temperature Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress (APCFS/SIF-2014) pp.391-395 (Collaboration)
32.	2014/12	Article	The influence of Ti layer on the hydrogen desorption properties of Mg in multi-layer Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress (APCFS/SIF-2014) pp.396-400 (Collaboration)
33.	2013/01	Article	Interatomic bonding model with polar motifs based on point group theory for B2 and A2 crystal structures of shape memory binary alloys Journal of Solid Mechanics and Materials Engineering 7(1),pp.1-10 (Collaboration)
34.	2011/05	Article	Musculoskeletal Computational Analysis Of The Influence Of Car-Seat Design/Adjustment On Fatigue-Induced Driving Modeling, Simulation and Applied Optimization (ICMSAO), 2011 4th International Conference pp.1-6 (Collaboration)
35.	2008/12	Article	Mechanical property of shear loading for seismic isolation rubber bearing with voids Journal of the Soceity of Materials Science Japan pp.1212-1216 (Collaboration)
36.	2008/03	Article	Pseudoelasticity on low carbon steel Proceedings of ICCES'08 pp.1573-1578 (Single)
37.	2007/10	Article	Characterization of The Binary Shape Memory Alloys and Consideration of Deformation Modes The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering pp.340-347 (Single)
38.	2007/02	Article	Classification and Characterization of the Shape Memory Binary Alloys Advanced Intermetallic-based alloys (980),pp.223-228 (Collaboration)
39.	2006/11	Article	Classification and characterization of the shape memory binary alloys 2006 MRS Fall Meeting Abstracts pp.895 (Collaboration)
40.	2005/06	Article	Crystallography of Ni-Ti Shape Memory Alloy by X-ray Diffraction and Diffraction Pattern Simulation Journal of the Society of Materials Science Japan pp.601-606 (Collaboration)
41.	2005/02	Article	Evaluation of Rotation Transmission Performance for Diaphragm Coupling by Finite Element Analysis Transactions of the Japan Society of Mechanical Engineers C pp.753-759 (Collaboration)
42.	2004/05	Article	Characterization of heavy ion irradiated PET membranes Nuclear Instruments and Methods in Physics Research B 217,pp.435-441 (Collaboration)
43.	2003/12	Article	Crystallography of Ni-Ti SMA in Austenite and Martensite by X-ray Diffraction Study 2003 MRS FALL MEETING (Collaboration)
44.	2002/10	Article	Effect of triaxial stress constraint on the deformation and fracture of polymers Acta Mechanica Sinica 18(5),pp.480-493 (Collaboration)
45.	2002/05	Article	Optimum design based on beam theory of micro walking mechanism by shape memory alloy Journal of Japan Society for Design Engineering pp.25-29 (Collaboration)
46.	2002/05	Article	Void nucleation of rubber material for seismic isolation due to tension load Transactions of the Japan Society of Mechanical Engineers A (Collaboration)
47.	2001/12	Article	Fracture behaviour of PC/ABS resin under mixed-mode loading Fatigue & Fracture of Engineering Materials & Structures 24(12),pp.895-903 (Collaboration)
48.	2000/08	Article	A Micromechanics Criterion for the Ductile Fracture of a Polycarbonate Key Engineering Materials 183-187,pp.121-126 (Collaboration)
49.	2000/08	Article	Tensile and Fracture Behaviors of PC/ABS Polymer Alloy Key Engineering Materials 183-187,pp.779-784 (Collaboration)
50.	2000/06	Article	Effect of Morphology on Crack Extension Property of PC/ABS Polymer Alloy Transactions of the Japan Society of Mechanical Engineers pp.1151-1156 (Collaboration)
51.	1999/12	Article	Effects of Temperature on Fracture Toughness of Silica-Particulate-Filled Epoxide Resins Transactions of the Japan Society of Mechanical Engineers pp.6 (Collaboration)
52.	1999/11	Article	Effect of Molecular Weight and Orientation on Fatigue Crack Propagation of Polyimide Resin Transactions of the Japan Society of Mechanical Engineers, A pp.2293-2298 (Collaboration)
53.	1999/10	Article	Mixed-Mode Fracture Behavior of Silica Particle Filled Epoxide Resin Mixed-Mode Crack Behavior, STP 1359 pp.129-142 (Collaboration)
54.	1999/04	Article	Effects of Moisture Absorption on Fracture Behaviors of Acrylonitrile-Butadiene-Styrene Resin Journal of Applied Polymer Science 72(3),pp.435-442 (Collaboration)
55.	1999/01	Article	The Effect of Molecular Weight on Tensile Property and Fracture Toughness of the Polyimide Resin Transactions of the Japan Society of Mechanical Engineers pp.67-71 (Collaboration)
56.	1998/08	Article	Evaluation of Impact Fracture Toughness of PC/ABS Resin Journal of the Soceity of Materials Science Japan pp.836-840 (Collaboration)
57.	1998/06	Article	Effect of Morphology on the Mechanical Properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends Polymer Processing Society Fourteenth Annual Meeting Abstracts pp.541-542 (Collaboration)
58.	1997/12	Article	Fracture Behavior of ABS Resin under Mixed Mode Loading Key Engineering Materials 145-149(Part 2),pp.743-748 (Collaboration)
59.	1997/07	Article	Mixed Mode Fracture Behavior of AS and ABS Resin International Conference on Materials and Mechanics '97 pp.362-372 (Collaboration)
60.	1997/04	Article	The Effect of Molecular Weight on Mechanical Properties of Polyimide 10th. International Conference on Deformation, Yield and Fracture of Polymers pp.394-397 (Collaboration)
61.	1997/03	Article	Crack Initiation Behavior of ABS Resin under Mode I and Mixed Mode Loading Material Science Research International 3(3),pp.158-165 (Collaboration)
62.	1997/02	Article	Evaluation of Ultra-Violet Degradation on PP and PC by Layering-Films Exposure Test Transactions of the Japan Society of Mechanical Engineers pp.437-444 (Collaboration)
63.	1996/04	Article	Method of Test for Fracture Toughness of Silica-Particulate-Filled Epoxide Resins and Effects of Moisture Absorption on Fracture Properties Transactions of the Japan Society of Mechanical Engineers pp.902-907 (Collaboration)
64.	1994/10	Article	Effects of High Humidity and High Temperature Exposure on Fracture Behaviour of Polycarbonate and Cellulose-Acetate Journal of the Soceity of Materials Science Japan pp.1218-1223 (Collaboration)
65.	1994/09	Article	Effect of Water Absorption on Fracture Behaviours of Rubber-Modified Polymer Alloy International Symposium on Fracture and Durability of Polymers and Composites Abstracts pp.29-32 (Collaboration)
66.	1994/06	Article	Changes of Mechanical and Chemical Properties of PP and PC Films Due to UV-Light-Induced Degradation Transactions of the Japan Society of Mechanical Engineers pp.1450-1457 (Collaboration)
67.	1994/06	Article	Fracture Toughness of Short Carbon Fibre Reinforced Thermoplastic Polyimide Engineering Fracture Mechanics 49(6),pp.943-952 (Collaboration)
68.	1994/04	Article	Fracture Behaviours of Polycarbonate and Cellulose Acetate Exposed Under High Humidity 9th International Conference on Deformation Yield and Fracture of Polymers PaPers pp.43 (Collaboration)
69.	1994/01	Article	In Situ Observation of Plastic Film Fracture Japan Soceity of Packaging Engineering pp.16-27 (Collaboration)
70.	1993/04	Article	Elastic-Plastic Finite Element Analysis on Bonding Edge of Dissimilar Materials JSME International Journal Series A 36(4),pp.382-389 (Collaboration)
71.	1993/03	Article	Measurement of Strain Distribution for Polymer Film by Lattice Pattern Recognition using Neural Network Transactions of the Japan Society of Mechanical Engineers pp.535-540 (Collaboration)
72.	1993/02	Article	Effect of Humidity on the Mechanical Behavior of Polyamide-6 and Cellulose-Acetate Transactions of the Japan Society of Mechanical Engineers pp.422-427 (Collaboration)
73.	1993/01	Article	Measurement of Elastic Modulus of Functionally Gradient Material Using Inverse Analysis Transactions of the Japan Society of Mechanical Engineers pp.197-202 (Collaboration)
74.	1992/06	Article	Elastic-Plastic Analysis on Dissimilar Materials by Finite-Element Method Transactions of the Japan Society of Mechanical Engineers pp.887-894 (Collaboration)
75.	1991/09	Article	A Study on Environmental Degradation of Plastic Films by IR Spectroscopy Transactions of the Japan Society of Mechanical Engineers pp.2264-2269 (Collaboration)
76.	1991/08	Article	Effects of Temperature and Humidity on Fracture Behavior of Thermoplastic Film Fracture of Engineering Materials and Structures pp.237-242 (Collaboration)
77.	1991/02	Article	Evaluation on Low Temperature Strength of Plastic Film for Balloon Transactions of the Japan Society of Mechanical Engineers pp.466-471 (Collaboration)
78.	1990/05	Article	Load Transfer between Femur and Prosthesis following Total Hip Replacement Transactions of the Japan Society of Mechanical Engineers pp.1269-1273 (Collaboration)
Display 5 items
Display all(78)

■ Conference Presentations

1.	2023/09/28	Characteristics of Simulated Body Fluids for Experiments in Vitro
2.	2023/09/28	Evaluation for Hydrogenation Properties of Mg-Fe Supported on rGO
3.	2023/09/16	Flow corrosion behavior of Mg in the simulated body fluid and physiological saline
4.	2022/11/30	Hydrogen Storage Material of Fe-Doped Magnesium Supported by Graphene (2022 MRS Fall Meeting and Exhibit)
5.	2021/01/25	Observation of Dynamic Deformation and Fracture Behavior of Bonded Material by Digital Image Correlation and Evaluation of Dynamic Fracture Toughness (15th International Symposium on Mechanics, Aerospace and Informatics Engineering 2021)
6.	2019/11/03	Evaluation on Mechanical property of Mg immersed in Simulated Body Fluid
7.	2019/11/02	Evaluation for Hydrogen Absorption and Desorption Properties of Mg/Fe/Pd Laminated Film with Vacuum Deposition
8.	2019/11/02	Evaluation of Hydrogen Absorption and Desorption Properties of Mg/Al Based Layered Thin Films
9.	2019/11/02	Hydrogen Absorption and Desorption Property of Mg-Si Compound
10.	2019/11/02	Numerical Simulation on the Impact Fracture of Glass Plate Stuck with Window Polyester Film
11.	2019/11/02	Temperature Dependence of Hydrogen Permeability of PEEK and PI thin Films
12.	2019/11/02	Texture Observation of Martensite Phase in Fe-Mn-Si Alloy
13.	2019/09/04	Fracture Mode of Glass Plate Laminated with Polymeric Film (The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019)
14.	2019/09/04	Hydrogen Storage Properties of Mg/Fe Multilayer Film with Ultra Vacuum Deposition Method (The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019)
15.	2019/07/10	Shape Memory Alloys, Fundamentals and Application (The First International Conference on Advances in Aerospace and Mechanical Engineering)
16.	2019/06/04	Improvement on the shape memory effect of Fe-Mn-Si alloy deformed under Cryo-temperature (JSSE Conference on Springs and Restitution Effect)
17.	2018/12/23	Crystal Structure Analysis of Fe-Mn-Si alloy at Plastic Deformation and Shape Recovery with EBSD (M&M2018 Materials & Mechanics Division Conference)
18.	2018/12/23	Hydrogen Permeability of Polymer - Metal Composite Membrane Depending on Temperature (M&M2018 Materials & Mechanics Division Conference)
19.	2018/12/22	Characterization of Magnesium Ribbon Coated on Mg with Resistance Heating Deposition (M&M2018 Materials & Mechanics Division Conference)
20.	2018/12/22	Evaluation for the Corrosion Behavior of Magnesium Coated with Biomaterials in Pseud Body Fluid (M&M2018 Materials & Mechanics Division Conference)
21.	2018/10/30	Improved Hydrogen Desorption Properties of Magnesium Hydride with TiFe0.8Mn0.2, Graphite and Iron Addition (16th International Symposium on Metal-Hydrogen Systems)
22.	2018/09	The Crystallography of Shape Memory Effect in Fe-Mn-Si BasedA lloy (The 13th International Symposium on Mechanics, Aerospace and Informatics Engineering 2018)
23.	2018/06/05	Improvement on Shape Memory Effect of Fe-Mn-Si Alloy with Rolling and Annealing
24.	2017/09/08	Analysis of the load at Spinal Column in Fundamental Football Position (The 12th International Symposium on Mechanics, Aerospace and Informatics Engineering 2017)
25.	2017/09/08	Effect on Mechanical Property of Fe-Mn-Si Shape Memory Alloy by Rolling (The 12th International Symposium on Mechanics, Aerospace and Informatics Engineering 2017)
26.	2017/09/08	Evaluation for mechanical properties of SUS304 cathodic charged with hydrogen (The 12th International Symposium on Mechanics, Aerospace and Informatics Engineering 2017)
27.	2017/09/08	Hydrogen Storage Properties of Carbon Nanotubes and its Composite Materials (The 11th International Symposium on Mechanics, Aerospace and Informatics Engineering 2017)
28.	2017/09/08	Temperature Dependence of Ti, Ni, SUS304, PI membranes for Hydrogen Permeability (The 12th International Symposium on Mechanics, Aerospace and Informatics Engineering 2017)
29.	2017/06/15	Development of Shape Memory Alloy Spring with Wires of Noncircular Cross Section
30.	2016/09	Improved of hydrogen desorption properties of Mg-based Alloys prepared with Mechanical Alloying (The 11th International Symposium on Mechanics, Aerospace and Informatics Engineering 2016)
31.	2015/09	Improvement for the Property of Fe-Ni Shape Memory Alloy by Al Hot Dip Coating (The 10th International Symposium on Mechanics, Aerospace and Informatics Engineering 2015)
32.	2014/09/26	Hydrogen Desorption Property of Mg/Ti Laminate with Pulsed Laser Deposition (The 9th International Symposium on Mechanics, Aerospace and Informatics Engineering 2014)
33.	2013/11/09	Crystallographic Observation of Martensite Transformation in Carbon Steel
34.	2013/11/09	Hydrogen storage properties of Mg-Cu-Graphite prepared with ball milling
35.	2013/11/09	Hydrogen Storage Properties of Mg/Fe Laminates with PLD
36.	2013/10/12	The musculoskeletal simulation analysis for the lumbar protection during lifting motion
37.	2013/02/21	Crystallographic Research of Martensite Transformation in Low Carbon Steel (Proceedings of the 7th International Symposium on Mechanics, Aerospace and Informatics Engineering 2013)
38.	2013/02/21	Development of new shape memory with mechanical alloying (Proceedings of the 7th International Symposium on Mechanics, Aerospace and Informatics Engineering 2013)
39.	2013/02/21	Hydrogen Storage Properties of Mg-Based Super-Laminates with Pulsed Laser Deposition (Proceedings of the 7th International Symposium on Mechanics, Aerospace and Informatics Engineering 2013)
40.	2013/02/21	Hydrogen storage properties of Mg-Cu and Mg-Cu-Graphite synthesized by mechanical alloying (Proceedings of the 7th International Symposium on Mechanics, Aerospace and Informatics Engineering 2013)
41.	2013/02/21	Impact fracture test with falling ball of a glass attached shatterproof film (Proceedings of the 7th International Symposium on Mechanics, Aerospace and Informatics Engineering 2013)
42.	2013/02/21	Musculoskeletal simulator analysis on low back pain (Proceedings of the 7th International Symposium on Mechanics, Aerospace and Informatics Engineering 2013)
43.	2012/02/27	Crystal structure consideration of Ni-Ti and Fe-Ni with Monte Carlo Simulation (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
44.	2012/02/27	Crystallographic investigation of martensite transformation in Fe-C alloy (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
45.	2012/02/27	Development of New Hydrogen Storage Materials by Laminated Alloy and Porous Silica (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
46.	2012/02/27	Hydrogen Storage in Mg Based alloy (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
47.	2012/02/27	Mg/Cu Super-laminated Film Developed for Hydrogen Storage (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
48.	2012/02/27	Mg/Fe Super-laminated Film Developed for Hydrogen Storage (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
49.	2012/02/27	Study of the heat quantity of transformation with Ti-Ni shape memory alloys (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
50.	2012/02/27	Thermal Shock Fracture of Film Attached Glass (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
51.	2012/02/27	Thermal Stress Analysis of glass by finite element method (Sixth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
52.	2011/02/14	Potential Energy Calculation at the Habit Plane for Martensitic Transformation in Ti-Ni alloy (Fifth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
53.	2011/02/14	Preparation and hydrogen storage properties of Mg-based alloy thin film (Fifth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
54.	2011/02/14	The EBSD Crystalline Orientation Analysis on Low Carbon Steel after Plastic Deformation (Fifth International Symposium on Mechanics, Aerospace and Informatics Engineering 2012)
55.	2010/03/11	Deformation Analysis of Human Anterior Cruciate Ligament by Musculoskeletal Model (Proceedings of the 16th Annual Meeting of JSME/Kanto)
56.	2010/03/11	Evaluation for the Elasto-plasticity of Heat-treated Low Carbon Steels with Si (Proceedings of the 16th Annual Meeting of JSME/Kanto)
57.	2010/03/11	Study of Pseudoelastic Effect for Carbon Steel (Proceedings of the 16th Annual Meeting of JSME/Kanto)
58.	2009/09/10	Improving the Property of Hydrogen Storage Alloy on LaNi5 Thin Films Layered by Other Elements (ISMAI-04)
59.	2009/09/10	Musculoskeletal Model Validation with Human Anterior Cruciate Ligament (ISMAI-04)
60.	2009/09/10	The Effect of Chemical Composition and Heat Treatment to the Pseudo-elasticity of Low-carbon Steel (ISMAI-04)
61.	2009/02/23	Biomechanics Analysis of ACL mechanical properties for Inverse Dynamics (ISMAI-03)
62.	2009/02/23	The symmetry of potential crystal structures nucleating by polarity arrangements on atomic bindings in alloys relating to the shape memory effects (ISMAI-03)
63.	2008/03/19	Pseudoelasticity on low carbon steel (ICCES'08)
64.	2004/11	Deformation analysis of Rubber in Seismic Isolation Bearings
65.	2004/11	Fatigue Crack Propagation Behavior of Polymer Alloy
66.	2004/11	Study on the Ideal Slip of a Bcc Structure
67.	2004/09	Low Cycle Fatigue by Shear Load of Rubber Material for Base Isolation
68.	2002/03	Cryatal Structure of the Martensite in Ti-Ni SMA Analyzed By X-ray Diggraction Method
69.	2002/03	Tensile and Shear Properties of Materials for Laminated Rubber Bearing
70.	2001/12	Discontinuous Crack Growth of Polymide Resin, Afected by Molecular Weight
71.	2001/12	Void Nucleation Characteristics of Rebber for Seismic Isolation Rubber Bearing By Tensile Load
72.	2001/11	Advanced study of elasticity fracture and fatigue of polymer alloy
73.	2001/09	Fatigue Crack Propagaton Preperties of PC/ABS and PC Alloys
74.	2001/08	Crystal Structure of Ti-Ni Shape Memory Alloy (Part 1 ; X-ray Diffraction of Ti and Ni)
75.	2001/08	Deformation simulation of plastic shock absorber as circular tube using FEM
76.	2001/08	Fatigue Crack Propagation Properties of ABS, AES, ASA and SX resin
77.	2001/08	Potential Energy of TiNi Shape Memory Alloy(SMA) Cluster
78.	2001/08	Shear Deformation Properties of Rubber Material for Seismic Isolation
79.	2001/08	Tension of an Elastic Solid with a Partially Debonded Rigid Circular Cylindrical Inclusion
80.	2001/03	A Study of Shock Absorbing Characteristics of Cylinders Subject to Axial Crashing (1st Report, Static Characteristics)
81.	2001/03	Effects of Morphology on the Fracture Behavior of PC/ABS Blends (2nd Int. Seminar on Numerical Analysis in Engineering)
82.	2000/11	Evaluation of critical stress for void nucleation of rubber materials for seismic isolation by finite element analysis
83.	2000/10	Analysis in atomic potential of Ti-Ni shape memory alloy by MEAM
84.	2000/10	Optimized structure of micro walking mechanism by shape memory alloy
85.	2000/10	Tensile properties of rubber materials for seismic isolator rubber bearing
86.	2000/09	Void nucleation of rubber materials for seismic isolation due to tensile load
87.	2000/08	Influence of morphology of polymer alloy on the Young's modulus
88.	1999/10	Finite Element Analysis on Ductile Fracture Behavior of Rubber Modified Plastics
89.	1999/10	Tensile Properties of Rubber Material for Seismic Isolation
90.	1999/07	Fatigue Crack Propagation of Polyimide Resin
91.	1999/06	Effect of Triaxial Stress Constraint on The Fracture and Toughening Mechanisms of PC/ABS Blends
92.	1999/06	Effect of Triaxial Stress Constraint on The Fracture and Toughening Mechanisms of PC/ABS Blends (Asian Pacific Conference for Fracture and Strength '99)
93.	1998/11	Effects of Stress Triaxiality on Ductile Fracture Behaviour of Rubber Particulate Polymer
94.	1998/11	Mixed Mode Fracture of PC/ABS Resin
95.	1998/10	Damage and Fracture Behavior of PC/ABS Polymers in Triaxial Stress Fields
96.	1998/10	Generation of Molecular Chain Network Model with Molecular Weight Distribution and Mechanical Analysis
97.	1998/10	Influence of Morphology on Fracture Behaviors of PC/ABS resin
98.	1998/10	Influence of Rubber Particle Size Distribution on Fracture Toughness of Rubber Particulate Polymer
99.	1998/06	Effect of Morphology on the Mechanical Properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends
100.	1997/11	Deformation and Fracture Analysis of Polymer Materials Based on Molecular Chain Network Model
101.	1997/09	Evaluation of Impact Fracture Toughness of PC/ABS Resin
102.	1997/07	Mixed Mode Fracture Behavior of AS and ABS Resin
103.	1997/04	The Effect of Molecular Weight on Mechanical Properties of Polyimide
104.	1997/03	Molecular mechanics analysis of atomic-force-microscope images
105.	1996/10	Evaluation of Impact Fracture Toughness of PC/ABS Polymer Alloys
106.	1996/10	Influence of Blend Compositions on Mechanical Properties of PC/ABS Alloy
107.	1996/10	Mixed-Mode Fracture Toughness of Semi-Conductor Package under High Temperature
108.	1996/10	The effect of molecular weight on mechanical proprty of the heat-resisting polymer material
109.	1996/09	Fracture Process Simulation of Polymer Material by Molecular Chain Model
110.	1996/04	Crack Behavior of ABS resin under Mode I and Mixed Mode Loading
111.	1996/04	Crack Behaviour of ABS Resin Under Mode 1 and Mixed Mode Loading (Proceedings of the International Sessions the 73rd JSME Spring Annual Meeting)
112.	1995/09	The dependence of tensile property and fracture toughness of the heat-resisting polymer material on molecular weight
113.	1995/09	The Influence of Rubber Particle Size on Fracture Toughness of ABS Resin
114.	1995/08	Examination of UV damage on PP and PC by the exposure test of layered films
115.	1995/05	Finite Element Analysis on Thoughening Mechanisms of Rubber-Modified Plastics
116.	1995/03	Strength evaluation of polymer film by chemical characterization
117.	1994/11	Effect of Moisture Absorption on Fracture Properties of Silica Particulate Filled Epoxide Resins
118.	1994/10	Finite element analysis on toughening mechanisms of polymer alloys
119.	1994/09	Effect of Water Absorption on Fracture Behaviours of Rubber-Modified Polymer Alloy
120.	1994/09	Film lay up test for evaluating polymer degradation due to UV light
121.	1994/09	Fracture behaviours of rubber-toughened polymer due to moisture absorption
122.	1994/08	Formation of wrinkle in thin films by localized heating
123.	1994/07	Environmental Effects on Fracture Behavior of Engineering Plastics
124.	1994/04	Fracture Behaviours of Polycarbonate and Cellulose Acetate Exposed Under High Humidity
125.	1994/03	The change of mechanical property of rubber-toughened polmer alloy due to water absorption
126.	1993/12	Evaluation on Fracture Toughness of Short Fibre Reinforced Thermoplasitc
127.	1993/11	Analysis on deformation behavior of polymer based on molecular chain model with slip
128.	1993/11	Correlation between chemical structure and mechanical property changes due to UV irradiation in PP and PC
129.	1993/11	Temperature effects on fracture properties of silica particulate filled epoxide resins
130.	1993/09	Effect of high humidity and high temperature exposure on fracture behaviour of polycarbonate and cellulose-acetate
131.	1993/07	The Influence of Humidity on the Mechanical Behavior of Polyamide-6 and Cellulose-Acetate
132.	1993/03	Fracture toughness testing of short fiber reinforced polyimide
133.	1992/09	Effects of humidity on the mechanical behavior of polymers by IR spectroscopy
134.	1992/09	Effects of moisture absorption on fracture properties of silica particulate filled epoxide resins
135.	1992/09	Effects of ultraviolet ray and heat on mechanical properties of PP and PC
136.	1992/09	Elastic-plastic finite element analysis on dissimilar materials
137.	1992/09	Influence of plastic deformation on elastic fields of dissimilar materials
138.	1992/09	Measurement of strain distribution for polymer film by lattice pattern recognition using neural network
139.	1992/08	The influence of environmental factors on the mechanical properties of the polymer materials
140.	1992	Elastic-Plastic Finite Element Analysis on Bonding Edge of Dissimilar Materials
141.	1991/11	Analysis on deformation behavior of polymer based on molecular chain model
142.	1991/11	Effects of humidity on the mechanical behavior of Naylon-6 and Cellulose-acetate
143.	1991/11	Elastic/plastic analysis on dissimilar materials by finite element method
144.	1991/09	A study by IR spectroscopy on degradation of plastic films due to humidity
145.	1991/08	Effects of Temperature and Humidity on Fracture Behavior of Thermoplastic Film
146.	1991/03	A study of environmental degradation of plastic films by IR-spectroscopy
147.	1991/01	Measurement of elastic modulus of functionally gradient material using inverse analysis
148.	1990/11	An elastic-plastic finite element analysis on dissimilar materials
149.	1990/10	Evaluation on Low-Temperature Strength of Plastic Film for Balloon
150.	1990/08	Evaluation on low temperature strength of plastic film for balloon
151.	1989/04	Load Transfer between Femur and Prosthesis following Total Hip Replacement
Display 5 items
Display all(151)

■ Academic Qualifications

1.	Degree Acquisition	Tokyo Institute of Technology, Doctor of Degree
2.	Degree Acquisition	Tokyo Institute of Technology, Master of Degree
3.	1987/04～1989/03	〔Master Course〕, Graduate School, Division of Science and Engineering, Tokyo Institute of Technology, Completed,
4.	1982/04～1986/03	Faculty of Engineering, Tokyo Institute of Technology, Graduated,

■ Career History

1.	2007/04	Professor
2.	2005/04～2006/03	Massachusetts Institute of Technology Visiting Scholar
3.	2001/08～2001/08	JAPANESE ASSOCIATE DEGREE PROGRAM in Malaysia Lecture
4.	2001/04～2002/03	Tokyo Institute of Technology Part-time Lecturer
5.	2001/04～2007/03	Meiji University Associate Professor
6.	2001/04～2002/03	Hokkaido University Part-time Lecturer
7.	1998/07～1998/09	National University of Lao by JICA Lecture ofthe program supporting
8.	1997/10～2001/03	Meiji University Assistant Professor
9.	1989/04～1997/09	Tokyo Institute of Technology Research Associate
Display 5 items
Display all(9)

■ Internal Committee Positions

1.	2016/04/01～2018/03/31	Deputy Director, Research Extension and Intellectual Property Headquarters
2.	2011/10/01～2012/03/31	Director, Japanese Educational Center
3.	2009/10/01～2012/03/31	Deputy Director, Headquarters of International Collaboration

■ Academic Associations Membership

1.	2003/12～	Materials Research Society
2.	1994/04～2004/03	The Institute of Materials, Minerals and Mining

■ Research Topics, Consignment Studies & KAKENHI Researches

1.	2020/04～2024/03	Hydrogen Storage Materials by the Nanoconfinement effects (Key Word : )
2.	2016/04～2019/03	Mechanism and decreasing the desorption temperature of Mg-based Hydrogen absorption materials by adding transition metals (Key Word : )
3.	2013/04～2016/03	Hydrogen absorption and desorption amount and temperature of Mg based alloys improved with fined, thinned and multilayered. (Key Word : )
4.	2010/04～2013/03	Study on Mechanism for pseudo-elasticity of Fe-based and Ni-Ti-based alloy (Key Word : )
5.	2006/04	Strength and mechanics of bioengineering materials (Key Word : bioengineering,material,)
6.	1998/04	Crystallographic Deformation mechanism of shape memory alloy (Key Word : shape memory alloy,deformation,)
Display 5 items
Display all(6)

■ Web Sites

Introduction on SFEM in Meiji Univ

■ Award History

2002

The best presentation award of JSDE

■ Current Specialized Field

Solid earth sciences, Theoretical studies related to particle-, nuclear-, cosmic ray and astro-physics, Organic functional materials, Mechanics of materials and materials (Key Word：Mechanics of Materials, Fracture Mechanics, Strength of Materials, Finite Element Analysis, Shpae Memory Alloy)

■ Courses and Lectures taught or delivered in the past

1.	Solid Mechanics（Meiji University）
2.	Elasticity and FEM（Meiji University）
3.	Mechanical Design 2（Meiji University）